Off Road Vehicles banner

Wiring up clearance lights

887 Views 2 Replies 2 Participants Last post by  MossyOakGlock9
We are trying to put clearance lights on a buddys dodge. We got the ones from advance auto parts. We got the lights mounted, and we ran the main wire and connected it with the connectors to the lights black wires. We then put it on the 5 amp fuse in the fuse box inside the cab. But, the lights wont come on. This is exactly how we did it on another dodge with the same lights and they worked perfectly. Any ideas??
1 - 3 of 3 Posts
try puting the power wire on the battery and see if it works and make sure your ground is good.
Nevermind, we got it fixed. But, we can't get the interior dome lights to work now. All the fuses are fine, is there something we are missing.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top