I was looking at BFG tire size chart, looking for an ACTUAL 33" tire, the AT 295/75/16 is 33.5 with 11.6 width, the 315 is 34.7 with a 12.1 width.
The MT has a 285 that is 33.1 a 305 that is 33.1 and a 315 that is 34.8. why do they make a 295 in the AT and a 305 on the MT. My pro comp AT's 265's are listed as 31.7 diameter but only measure 31" . is a 315, 34.7 or are something a little smaller, and will they fit a 3" lift without rubbing, i know alot of this depends on the wheel, but i dont know if i want a 16x10 or a 16x 8, does anybody know of a good combo for a 3" lift with the beefiest tire possible.my truck will fit a 285 easily stock so from the math with a 3" lift a 35" should fit, but it doesnt (easily). this stuff sometimes confuses the shyt out of me.
The MT has a 285 that is 33.1 a 305 that is 33.1 and a 315 that is 34.8. why do they make a 295 in the AT and a 305 on the MT. My pro comp AT's 265's are listed as 31.7 diameter but only measure 31" . is a 315, 34.7 or are something a little smaller, and will they fit a 3" lift without rubbing, i know alot of this depends on the wheel, but i dont know if i want a 16x10 or a 16x 8, does anybody know of a good combo for a 3" lift with the beefiest tire possible.my truck will fit a 285 easily stock so from the math with a 3" lift a 35" should fit, but it doesnt (easily). this stuff sometimes confuses the shyt out of me.