Off Road Vehicles banner

1 - 3 of 3 Posts

·
Registered
Joined
·
166 Posts
Discussion Starter #1
I just put my new stabalizer on but did not have time to put the shocks on, just had a minute to look at them. I had a few questions. How are you supposed to get to the bottom bolt on the bottom of the shock, seems like a tight fit? Also, are you able to pull the shock up through the holes of the shock tower or do you have to take the shock tower out?

Thanks
 

·
Registered
Joined
·
13 Posts
The towers need to be removed after you undo the top show nuts. The bottom shock bolts are easy, they have nuts the braces. Just did mine in 20 mins.
 

·
Registered
Joined
·
2,605 Posts
ya, there is a tab welded to the bolt head so it keeps it from spinning. unless you're like my POS, and the tab is so rusty that it just busts off. then you have to take a wheel off and slide a wrench in a little slot to put on the bolt head.
 
1 - 3 of 3 Posts
Top