On my homeade lift, my tie rod end on the passenger side scrapes the bottom of the swaybar mounts when flexing, even a little. A drop pitman arm would give enough angle to get it out of the way. Who makes them? JC Whitney has them for about $55 but JC Whitney has the same reputation for durability as Dollar General Store. I would hate to be over the axles in water and break a pitman arm! You guys always seem to know who sells what thanks a lot.
PS Any other ideas on how to clear this are welcome. I have about 4 inches of lift and have done nothing to the swaybar mounts at all. I thought about spacers where it bolts to the frame like on real lifts, but thought the drop pitman arm would eliminate any binding I might already have.
PS Any other ideas on how to clear this are welcome. I have about 4 inches of lift and have done nothing to the swaybar mounts at all. I thought about spacers where it bolts to the frame like on real lifts, but thought the drop pitman arm would eliminate any binding I might already have.
