Off Road Vehicles banner

1 - 4 of 4 Posts

·
Registered
Joined
·
182 Posts
Discussion Starter #1
i finally got rid of my Chevy Grocery getter 2wd and got a mans truck
Fx4 F-150 5.4V8 stock and i put a leaf spring in the rear and elevated my torsion bars (how much is too much on those Torsion Bars guys??)
I have a tire question too i want either
305/70R16 Baja Claw Radials
of will a
35x12.5R16 Baja Claw Radial fit??? I want a 35 but im not sure it will run on it
Oh and the wheel is a 16x8 or a 16x10 either one which ever will fit better both have a 4 inch offset too.
 

·
Registered
Joined
·
182 Posts
Discussion Starter #3
Now keep in mind that a Fx4 system has an extra two inch's over the standard 4x4 ford it has a two inch block in the rear under the leaf springs also has bigger hardware under the front end. Making the truck sit stock with a p265/70 R17 stock sized tires.
 

·
Registered
Joined
·
213 Posts
you probably will rub with 35s.(esp. off-road) might have to do a little trimming, or just run a 33, you should be alright. either that or just run a small body lift, they are pretty cheap usually.
 
1 - 4 of 4 Posts
Top