Off Road Vehicles banner
1 - 3 of 3 Posts

·
Registered
Joined
·
96 Posts
Discussion Starter · #1 ·
I am in the process of designing something to go in the bed of a truck, but I need to get some measurements from a few different trucks new and old. I dont know anything about Chevy/GMC so I dont know when they had model or body style changes or any of that. Mostly what I need is the bed measurements, and what model, cab type, and year the truck is. Here is what I need: (I would like a couple of different configurations from different decades, including the 70s full size trucks, and if there are some S10 owners I could use those also)


1) Bed length in inches (not including a flat tailgate)

2) Bed width in inches in front and behind the wheel wells on the floor of the bed not suspended above it

3) bed width between the wheel wells again on the floor of the bed

4) distance from the end (tailgate start) of the bed to the wheel well

5) The heigth to the bottom of the bed rail from the floor in inches

6) the heigth to the bottom of the bed rail in inches from the high point on top of the wheel well

7) year , model, cab type, swb or lwb,


I appreciate anyone who can get these numbers for me. Like I said I would like them from a number of different year models, especially when there were body or model changes or introductions. If anybody knows when there were body style changes or like model introductory years that info would be great also. Anyway Thanks for your help.
 

·
Registered
Joined
·
168 Posts
1. 78"
2.61.5"
3.48.75"
4.43.5"
5.19.25"
6.8.75"
(note: I have a drop in bed liner so these numbers probably have a -1/8" error or so)

7. 1995 Chevy k1500 ext. cab, short bed

THe big model changes were in 1988 and 1999, i believe.If you have any more questions, just shoot me a message!
 
1 - 3 of 3 Posts
Top