Off Road Vehicles banner
1 - 6 of 6 Posts

·
Registered
Joined
·
558 Posts
Discussion Starter · #1 ·
i need to get the instructions for the daystar spacers , because i ordered my spacers off of ebay , so i didnt get the instruction sheet....so if one of you guys has that sheet would you kindly seend it to me.....thank you
 

·
Registered
Joined
·
2,024 Posts
Can you give us some info on your vehicle
 

·
Registered
Joined
·
807 Posts
it only has like 5 steps. unbolt jack up the vehicle and the axle, unbolt the shocks on top, drop the axle down, pull out the springs and shock, bolt in the daystars and bolt everything back up. sounds alot easier than it looks though. dont use those though, thats just what got from my memory.
 

·
Registered
Joined
·
3,818 Posts
If you can get a spring compressor it makes it go ALOT easier. That is if you need one, some trucks do and some don't. If you need one and dont have one, what I did is jacked the truck up by the axle and after blocking the frame off, I chained the springs while compressed and dropped the axle. Then slipped the spacers in and bolted them up.
 

·
Registered
Joined
·
160 Posts
I've used a bottle jack between the frame and axle, but I'd be VERY careful. It's not a very safe way of doing it, but in a pinch, it works.
 
1 - 6 of 6 Posts
Top