Off Road Vehicles banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,232 Posts
Discussion Starter #1
I replaced all my speakers with Alpine separates and it sounds really crisp and clean. I was running all alpine until I got a deal on a Pioneer head unit that I really liked, so I swapped that out, but kept all the Alpine speakers. My opinion though, you need amps and a sub to complete the audio system. I personally am pushing close to 1000 watts with my system. Check out my custom audio system on my homepage:

http://hometown.aol.com/tunisjlopez/myhomepage/index.html

Speaker size information (Dodge QC):
Front Doors: 6x9
Rear Doors: 6.5

Good Luck with your audio upgrades... <IMG SRC="/board/images/smilies/bigthumbup.gif">
 

·
Registered
Joined
·
502 Posts
Andy,

Since my stock speakers are all sitting in my garage I went out to messure them for you.

The dash speakers are 1.25 inch. The front doors are 6x9s and the rear doors are about 5.5 inch.

I had my front doors and dash replaced with Kicker seprates. They made plates to mount the 6.5 inch woofer in the door and the tweeters mounted no problem.
The rear doors I have Infinity Kappa 6.5 inch 3 way speakers. These all run off of a Fosgate 600.4 amp. I have the MTX thunderform under the back seat which is powered by a Fosgate 360.2 bridged to mono.

If you have any other questions about it let me know.
 

·
Registered
Joined
·
1,073 Posts
Yeah okay, the stereo thing. All of my speakers are in stock location (excluding JL Audio Stealthbox). My little stereo consists of...JL Audio 1" tweeters in the front pillars, Eclipse 6x9s in the front doors, and MB Quart 5 1/4" in the rear doors. My JL Audio 12W3 in the center seat location provides the bass, a Lightning Audio 800 watt amplifier powers it all. Everything still looks stock though, I'll continue using my stock CD/Cass. deck until it stops working.
 
1 - 3 of 3 Posts
Top