[bullram]

Hello, does any body know who makes the full length bars that go to the back wheel and have only (ONE)step at the front it is for a 99 club cab dodge thanks for all replies

 

[JasonB]

I do not know who makes them, but I have seen the ones that go all the way under the bed to the rear tires but had 2 steps. So I know they are out there for 4 doors, but not sure about single steps.

Most bars stop at the back of the cab, with 1 or 2 steps.

Sorry I couldn't help more.

 

[bullram]

thanks I will keep looking , I know they are out there, they are on a lifted electric blue dodge, with viper white stripes on the roof and the hood, but I cant remember where I saw them at..........somewhere on the net???????/

 

[TUNIS]

Check out Quadratec's website. You could also order a free Dodge catalog:

http://www.quadratec.com/

There are some tube steps made by Manik that extend all the way to the rear wheels/bed that have a step for the cab and a step for the bed.

 

[canyonero02]

you'll need to buy ones for a clubcab ram, and not a quad cab. they are extended cab but only have 2 doors so only need 1 step on each side. they bolt up the same way so theyll still fit on the quad cab.

 

[HotRodDaddy]

bull if you wheel the full length ones bend real easy. personal experience! I'm taking mine off this weekend. the problem is the rear mounts to the spring eyelet and isn't very strong.

 

[DirtyDodge4x4]

<!-- BBCode u1 Start -->http://www.gorhino.com/documents/6000-series.html" TARGET="_blank<!-- BBCode u1 End -->

 

[bullram]

Thanks for the info I tried a couple of places to get a picture of the bars for the club cab but I couldnt find any, thanks again for all your input......

 

[joe blow]

I just took a pair off of my '95 club cab. sell them to you for $50.00.

 

[joe blow]

I just took a pair off of my '95 club cab. sell them to you for $50.00.

 

[bullram]

Joe... do the bars you have go all the way to the rear tire, and do they have a step? for the front/, what brand and type,any pics?, sorry about all the questions, thanks for your help........<IMG SRC="/board/images/smilies/drool.gif">

 

[bullram]

Yes that is it ,thank you for finding it.. and for taking the time:bigthumb

 

[NFD538]

n-fab.com

 

[Mud Ready]

This threads 4 years old, I bet he is still looking. :roll: