Off Road Vehicles banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey guys I have a 96 dodge 2500 w/ the v10. My 4x4 is not working. I have checked the vaccum lines and they are not leaking but I only have vaccum to the switch on top of the t-case. I replaced that switch thinking that would be my issue but I still don't have vaccum to the CAD. Any suggestions?
 

·
Administrator
Joined
·
15 Posts
Not familiar with this system, but just confirming you have vacuum to the switch, but not out, correct?

Assuming the switch should have vacuum passed through when shifting 4wd; I would still assume it is either a switch issue or insufficient vaccum.

Do you know what the vacuum spec is vs what vacuum you are seeing?
 
1 - 2 of 2 Posts
Top