Off Road Vehicles banner

1 - 4 of 4 Posts

·
Registered
Joined
·
166 Posts
Discussion Starter #1
I just ordered a rancho 5000 steering stabalizer along with rs5000 shocks. Should i get it aligned after putting the new stabalizer on?

Thanks
 

·
Registered
Joined
·
896 Posts
the stabilizer won't do anything to your alignment. you only need to get it alligned if it is already off (the allignment that is, not the stabilizer)
 

·
Registered
Joined
·
42 Posts
U may need an alignment. I just did a new stabilizer and had to remove everything from the pitman arm to the first sleeve just below the stabilizer. Reason being, that stabilizer is press fit, and it took a large sledge to bust it lose. Now my steering is off cause I didnt get the sleeve exactly aligned. Maybe if I marked it better, i dunno.
 

·
Registered
Joined
·
1,681 Posts
No alignment even If you take all of your steering off. (Unless you loosened the turnbuckles) I ran into the same problem with the stabilizer not wanting to press out of the taper. I took my steering off and beat the crap out of it with a 12lb sledge :bigthumb:
 
1 - 4 of 4 Posts
Top