1. Sorry for the initial hiccups after launch. Everyone should be able to login now.

    Welcome to the new Pavement Sucks!

    If you are having a problem logging in, try RESETTING YOUR PASSWORD HERE

dodge ram cab mounts

Discussion in 'Dodge 4x4' started by buriedinmud63, Oct 2, 2011.

  1. buriedinmud63

    buriedinmud63
    Expand Collapse
    New Member

    59
    0
    0
    im replacing my driver side floor pan and i realized that my cab mounts are rusting out. not off the frame but the thinner metal attached to the bottom of my floor pan were the bolt goes through. anybody got an idea as to were i can get new ones or is this actually part of the floor pan
     

  2. buriedinmud63

    buriedinmud63
    Expand Collapse
    New Member

    59
    0
    0
    [​IMG]
    this is what i need but i cant find it for my truck please help
     

  3. Milan

    Milan
    Expand Collapse
    New Member

    51
    0
    0
    check lmc truck
     
  4. buriedinmud63

    buriedinmud63
    Expand Collapse
    New Member

    59
    0
    0
    nothin they dont even list em
     
  5. Milan

    Milan
    Expand Collapse
    New Member

    51
    0
    0
    might have to visit a junk yard and cut some good ones off one. then weld them on
     
  6. buriedinmud63

    buriedinmud63
    Expand Collapse
    New Member

    59
    0
    0
    you think i could get them directly through s deeler
     
  7. Tango

    Tango
    Expand Collapse
    New Member

    3,644
    0
    0
    maybe weld a pre-drilled backing plate; or some 4" x 1/8" hot roll to the floor board piece you are replacing?
     
  8. buriedinmud63

    buriedinmud63
    Expand Collapse
    New Member

    59
    0
    0
    i would but the whole cab mount to floor pan is gone i need to taotally replace all of it
     
  9. outalne94z71

    outalne94z71
    Expand Collapse
    Well-Known Member

    i don't see them on any of the resto sites but i did notice browns here in wisconsin does have better prices than lmc for replacement parts

    www.cooltruckparts.com
     
  10. swirvin21

    swirvin21
    Expand Collapse
    New Member

    1,464
    0
    0
    You'll probably need to make your own or cut them off a donor
     

Share This Page