control arm issue please help

[buriedinmud63]

ok i swapped axels in my 95 dodge ram and got new control arms the bottom ones are lined up fine and one of the top ones but the othe top one i really had to push in twords the frame to get it to fit in seems to fit ok but im wondering why it did this happen nothing is bent and im kinda consernered this not going in straight could damage somthing
anyone have any insight t this or see any problems or am i overreacting

[The Dude]

Is your track bar or sway bar bolted in while trying to do this? If so that can move things around majorly. In general they are a pain to get lined up especially by yourself. Stock bushings have enough deflection that you should get it all together without damaging them. Take it down to a good alignment shop when your done.

[buriedinmud63]

there is nothing but the control arms in
you think it would be fine to leave it would an alignment shop be able to straighten it out i just want it to ride right and not rip somthing off the frame or axel