body lift how to

[snaker187]

has any done a video or a write up with pics on how to install a body lift on the second gen ram??

[The Boss]

http://www.pavementsucks.com/tech-article-8.html

[Miami_Son]

Why is it that since the forum switch to the new format, every time someone posts a link to an old DIY in here, clicking on it takes me to the PS home page and not the DIY?

[The Boss]

(02-23-2010 12:08 PM)Miami_Son Wrote:  Why is it that since the forum switch to the new format, every time someone posts a link to an old DIY in here, clicking on it takes me to the PS home page and not the DIY?

click the link again. the site redirects a user to the portal page once every 20 hours or when they visit the site, which ever comes later.

if you come back to this thread and click the link, it should take you to the tech section.

[MYTYT]

I might have missed it in the write up, but honest to God I read it twice.

What did you have to do about the hard brake lines on the master cylinder side? Did they have enough slack for the added 3" ??

I forgot to remove one of the little plastic clips that hold the brake lines together when I body lifted my Dakota & it almost got nasty.

[The Boss]

i popped the clip off the fender and left it attached to the lines. then slightly bent the lines to give them room. that worked for me and when i removed my body lift, the plastic thing just needed to be slide a bit and then plugged back into the fender

[Cody]

I was curious about the diesels that "technically" they do not fit but i can modify the inter-cooler piping to make it work?