Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Road Armor (group buy)  
02-25-2004, 07:55 PM
Post: #1
 
Road Armor Bumpers Group Purchase:

All, I have been talking with the fine folks at Road Armor about a possible group purchase on their bumpers. As it just so happens they have agreed to give a 25% discount off their list prices. This covers ALL bumpers, even the new stealth series Dodge, Ford, Chevy, Avalance etc...bumpers and all available options, and includes either satin black or dark metallic gray. List prices would be on the pricing page of there web site. Shipping is not included. Terms would be 50% deposit at time of order, and the balance prior to shipment. Estimated shipping times are 2-3 weeks from the date of order. They have increased there manufacturing capacity over the last 4 months and currently have 250 units ready for final a$$embly at any time, as well as 4 Super Duty front bumpers with the T2 guards and 5 03+ Dodge front bumpers with T2 Guards that are uncoated, just need to be coated then packed and shipped. We would need to put together a minimum order of 10 bumpers to receive the 25% discount and if we get 15 bumpers it goes to 35% off Shocked thats a savings of over $700.00 on the bunmper with TI Guard

For technical questions contact Road Armor directly at (425) 328-7194.

Pictures of their new rear bumper for the 94-01 2nd gen, Dodge were just put on their site this month.and the new rear bumper for the 3rd gens starts production tomarrow.

Please respond here or e-mail me directly at svorhees@sbcglobal.net if you are interested.

This discount will run until the 26th of March.

TI Guard:
[Image: vorhees1_big.jpg]

TII Guard:
[Image: 03dodge_big.jpg]

The new rear:
[Image: dodge97_rear.jpg]

Check out there web they have a base bumper with out guards as well.

http://www.roadarmor.com/ra3/index.html

BBD




BigBadDodge
Title Sponsorship by:
http://www.PiersDiesel.com

Additional Team Members:
South Bend Clutch
Fluidampr
Northwestern Service
Ponci's Diesel Center
Reality Custom Painting
Woodruff Diesel
Watson Performance Engineering
AirDog
Snow Performance

http://www.BigBadDodge.com
Visit this user's website Find all posts by this user
Quote this message in a reply
02-25-2004, 07:58 PM
Post: #2
 
that is a pretty good deal. wish i had some more money. Bang Head




2004.5 Ram 2500 Cummins 600 SLT 4x4, Isspro Boost/EGT/Tranny temp gauge setup, EDGE EZ, AFE Pro Guard 7, Torque Tube<BR><BR>85 4 Runner lifted with 33x14.50 SSR\'s for now...
Find all posts by this user
Quote this message in a reply
02-25-2004, 07:59 PM
Post: #3
 
THat is like $950 for the base dodge ram bumper!!! Man i hope my truck sells before march 26th




<BR>2008 Dodge dakota crew cab 4x4 V8 SLT 5in lift and 33in bfg all terrains/sold
<BR>2001 dodge ram 10in suspension, 2in body, bilstein 5150\'s, reindexing ring, 41 irok radials on 17x10 pacers, adjustable t-bar, roll bars, rock sliders, clear corners all around, ivy reading winch bumper, mm 12000 winch, rear bumper, flowmaster super 40. locked 60 and 14 bolt with 5.13's/sold
<BR>2004 jeep grand cherokee limited v8
1998 wrangler sahara 31in muds and winch (hunting rig)/sold
2010 big horn crew hemi 33 trail graplers
Visit this user's website Find all posts by this user
Quote this message in a reply
02-25-2004, 08:02 PM
Post: #4
 
$952.50 to be exact, and that is only with the 25% discount what if we got 15 Very Happy
Visit this user's website Find all posts by this user
Quote this message in a reply
02-25-2004, 08:45 PM
Post: #5
 
im in the market for a bumper, and i know a few people on this site are as well. whats the deal with road armour? if you get on trail ready they got a big disclaimer about road armour.




04 3500 4x4 CTD, DRW, four door, leather, fully loaded, full syn Amsoil in everything, Geneos garage muffler delete/silverline tip, 3 gauge pillar from dieselmanor (isspro),turnoverball/DMI,MAGHYTEC diff covers, Garmin GPS and more to come.<BR><BR>07 Trailblazer SS, 6.0 LS2, 400HP, all wheel drive, Magnaflow exhaust, leather, navigation, every possible option, CAI on the way.<BR><BR>Gone but not forgotten... 2001 2500,v10, dick cepek lift, don thuren everything, iroks, dynatrac axles...
Find all posts by this user
Quote this message in a reply
02-25-2004, 09:30 PM
Post: #6
 
Ah yes, the ole "FAIL READY" statement on there site, don't be suprised if fail ready goes away:

Road Armor Response:

In regard to the law suit, we just completed deposing the two guys who own the failing company Trail Ready/RSI (or as we affectionately refer to as "fail ready") these boys decided they wanted to try and take what was not theirs. Along with defrauding their local union, they have a $75,000 tax lien against them and are in arrears with the union for over $120,000. They intend to file bankruptcy in order to get out of the union debt, while spending over $50,000 on their rock crawler toy. The truth always ends up coming out, they are in major trouble and stand to loose their business and their homes.

As you have seen over the last year Road Armor has released over 20 new products. We worked very hard to increase our manufacturing capacity and have taken our lead times from months to a couple of weeks and at times (depending on the product) days. We are currently shipping over 180 units a month.

Competition is always a good thing and we welcome the opportunity. I think we just need to lay out all the pertinent facts of our features and benefits and allow you to make an informed decision. We/I forget about all the differences in our product and every other manufacturer. If you do decide on Road Armor, take some pride in this: look far and wide you will never see anybody who says they would prefer another brand over Road Armor, if cost wasn't an issue and with this discount it is not!

Now I know some of you had bad experiences with the Trail Ready brand of "Roadarmor" bumpers, that was not us. That was the whole reason for the split. Since November 2002 Road Armor as a company and as a product line has been completely reborn. Our design technology is cutting edge, no other competitor comes close. Our product is by far more complex in manufacturing than any other, our quality is top notch, our customer service has been good but we are striving to make it even better. During the last year and a half we grew 220% in sales. We have put our head guy Jim Medlock in charge of customer service. He is a top flight individual, you can count on him like the sun. If you ever have a problem you can reach him on his cell at 206 510 8648. Jim has been with me for over four years and is a true professional.

Our business is well managed; we have a full time CFO managing our finances, Pete Dahmen. He is also a top flight professional. Pete was a former customer of fail ready, outraged with how they delt with him as a customer he came to me to finish out his truck. He was so impressed with us that he came onboard as a partner in the business. Mark Hanson out of Dallas TX, was a former employee of Ranch Hand and had been looking at Road Armor for several years. After the split from fail ready, Mark called and said he was so impressed with Road Armor he had to find a way to be involved. Mark is also a partner and is now our COO. He has been the leader in our work on the H2 product line. Mark is highly valuable to our business and if you ever need anything business realated, is there for you anytime.

I realize this may be more than you wanted to know, just decided to hammer out some details in order to let you know who we really are! Thanks for you consideration.
JD

Guy's I have been dealing with Road Armor since I purchased my front bumper almost a year ago, I have nothing but good to say about the company, there customer support and support after the sale have all been great.

Feel free to call and talk to James or Jim bought great guys who can answer any of you questions if I can't

BBD
Visit this user's website Find all posts by this user
Quote this message in a reply
02-26-2004, 01:14 AM
Post: #7
 
I would like to be on this interest list. Can the bumper be fitted with brackets for a 3in body lift?




2007 CTD
2004 LJ
Find all posts by this user
Quote this message in a reply
02-26-2004, 01:28 AM
Post: #8
 
you could just modify your frame like I did.




Lance
<BR>Ford HP Dana 60 front axle, PSC assist, 6 inch Dick Cepek lift, 8 inch Atlas Springs, 41 Irok radials on steelies with Stauns, borgeson shaft, custom tie rod and drag link, DT Track bar, Lock rite front, Detroit rear, KDP killed, 100 plate, 435 injectors, Goerend transmission, Speedliner, Warn 12K hydraulic
Visit this user's website Find all posts by this user
Quote this message in a reply
02-26-2004, 01:35 AM
Post: #9
 
too bad they dont make those for toyotas cause those look badass




Rob @ Muchado Productions
Visit this user's website Find all posts by this user
Quote this message in a reply
02-26-2004, 01:48 AM
Post: #10
 
BigBadDodge
where did you gat your air bag and how much were they. I run those same bags and they run me about $180 each. I need to replace mine soon. Just looking for a better price. any pics of your installed?




-Nick
Hendrix Toyota chassis #26 on a \'74 Bronco frame, 5.0HO/C6/203/205, F/R steer Rockwells
The tow rigs:
'05 CTD Dually Hers
'06 CTD Dually 4X4 His
http://www.TXWheelers.com/
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Road Armor: Dodge Ram.. who has pics? TX Ram 98 14 137,386 03-16-2010 05:13 AM
Last Post: swirvin21
  8" sub group buy - Resonant Engineering RE8 - CHEAP K5Chris 0 235 09-05-2004 09:50 PM
Last Post: K5Chris
  Road Armor Sighting woody 0 701 06-14-2002 11:51 AM
Last Post: woody

Forum Jump:

[-]
Permissions Box
You cannot Post Threads.
You cannot Post Replies.
You cannot Post Attachments.
You can Edit Your Posts.
HTML is off
MyCode is on
Smilies is on
[img]-code is on