7 inch parts list

[dodgeramit1001]

I have been debating weather to buy a 5 inch or piece together a 7 I decided on the 7 and this is what I think I need anything else I am missing or any suggestions would be great.

Front

7 inch skyjacker coils
2 new shocks
7 inch custom short arms from Top Gun customz
Upper control arm relocation bracket
Skyjacker adjustable track bar
Extreme drop pitman arm

Back

4.5 inch block (already has 1 inch AAL)
2 new shocks

A few months after the initial investment

36 inch DC mud country's
4.56 gears
indexing ring
sway bar drop bracket

I know blocks are bad I will eventually replace them with skyjacker 6 inch springs

anything I am missing brakes vacuum lines anything?

[smitters44]

I would save the money from the blocks and buy a BDS shackle flip. I got about 4 inches of lift from it and it wasn't too difficult to install. The best part only cost me $140 bucks for the shackle flip then another $50 bucks for the zero rate add a leaf to move the axle backwards an 1 1/2". Just my .02 cents.

[dodgeramit1001]

Yeah that was the other way I was thinking of lifting the back if I use the block and don't like the stance (sitting to low in the back) then I will pull it and do the shackle flip and a smaller block or shell out the cash for the 6 inch springs. The block is a cheap temp thing to get the lift I want because my tires won't pass inspection in june so I figured I would lift it more and get the bigger tires when the states making me kill 2 birds with one stone.

[magnusdeus24]

this is so weird i saw this because im thinking of doing the exact same thing haha. i was leaning more towards a 5 inch superlift kit because of cost but how much is this going to run you? i would rather do a 7 inch if its not too much more. ive also got the same tires as you but 33's haha.

[dodgeramit1001]

about 1500 in parts real close to just buying a good 5 inch so figured why not

---

o and I found out you need extended brake lines for the back thats the one thing I didn't have listed

Thanks Mike