Threaded Mode | Linear Mode

DODGERAMIT · 05-13-2002, 03:08 PM

can anyone tell me if 315's will rub anywhere with 3" of lift and 5" of backspacing on the rim? I am unsure of the offset. The rims are 16x8 ARE helix.

DODGERAMIT · 05-13-2002, 03:29 PM

I just check with ARE and they say the offset is 12mm.Still need some help though.

***The Boss*** · 05-13-2002, 03:37 PM

I ran 16x8" AR Bajas with 4.5" or so of backspacing with my 3" and 315's. I rubbed the lower control arms just barely at full lock. It made noise and polished about 1/2" of the control arm but that is it.

Without the swaybar and fully stuffing it, I could rub the read of the fender well, but that is jsut plastic and didnt hurt anything. Just roughed it up a bit, not smoth anymore like the rest of the liner.

unclemark369 · 05-13-2002, 06:30 PM

Once again Jason has got the plan. I got 16x8 AR outlawII with 4.5 backspace after talking to Jason with 315/75/16 xterrains and dont scrub one bit even at full stuff but I have a 3in suspension and 3in body, but I put them on before I added the body lift and ran just fine.